Where to Buy Wolverine Peptide Blend: The 9 Best Vendors in 2026

If you have searched where to buy Wolverine peptide blend, this guide names eight research suppliers that sell BPC-157 and TB-500 in a single vial, comparing verified sizes, current prices, purity claims, and certificate of analysis availability side by side.

How these rankings were built. Every vendor below was evaluated on five criteria: whether batch-level certificates of analysis are published on the product page, whether the testing laboratory is named, price per vial, manufacturing standards, and how clearly the product specification is written. All figures were pulled directly from each vendor’s live product page in August 2026.

Research‑Use‑Only Notice: All content on this website and all product information are for educational and informational purposes only. All products referenced are for laboratory research, analytical, and in‑vitro use only. They are not medicines or drugs, have not been evaluated or approved by the FDA, and are not intended to diagnose, treat, cure, or prevent any disease. Any bodily introduction into humans or animals is strictly prohibited.

Where to Buy Wolverine Peptide Blend: Quick Comparison

The table below ranks all eight suppliers on the factors that separate a verifiable product from a purity badge with nothing behind it.

What Is in a Wolverine Peptide Blend?

A Wolverine peptide blend is two research compounds, BPC-157 and TB-500, co-lyophilized into a single vial, usually at a 1:1 ratio. The name is a common nickname used in research and lab communities, not a scientific or regulatory designation. That is exactly why listings differ so widely between suppliers.

The Two-Peptide Blend: BPC-157 and TB-500

BPC-157 is a synthetic pentadecapeptide, meaning it is 15 amino acids long. It is registered in PubChem as CID 9941957 with the molecular formula C62H98N16O22. TB-500 is a synthetic peptide corresponding to a region of thymosin beta-4, a 43-amino-acid protein originally isolated from calf thymus tissue in the 1960s.

Both compounds have been examined almost entirely in preclinical settings. A systematic review of BPC-157 in research identified 36 studies published between 1993 and 2024, and the overwhelming majority were animal or cell-culture work. That distinction matters when comparing suppliers: these are sold as research compounds and not for human or animal use, and every reputable vendor labels them that accordingly.

The 9 Best Places to Buy Wolverine Peptide Blend in 2026

1. Protide Health

Best for: Buyers who want to verify a specific vial against a published lab document before paying.

Protide Health ranks first among places to buy Wolverine peptide blend because it publishes more batch-level verification data on the product page than any other supplier reviewed. Its BPC-157 and TB-500 Wolverine Blend is offered in 10mg/10mg and 30mg/30mg vials at $145 and $305, and the product page carries five separate certificates of analysis laid out chronologically, each with its own COA number, lot identifier, and report date. The current listing shows 99.72% purity under COA 2607100556, lot PH-bt60-0316, reported July 13, 2026.

That structure matters more than it might sound. Most suppliers in this category publish a single certificate image with no batch number, no date, and no laboratory named, which makes it impossible to confirm that the document corresponds to the vial being shipped. Protide Health is one of only two vendors in this entire comparison that names its testing laboratory on the page, Freedom Diagnostics, and it specifies the full test battery: LC-MS for identity confirmation, HPLC-UV for purity, LAL endotoxin testing per USP General Chapter <85>, and net content verification.

On price, the 30mg/30mg format works out to roughly $5.08 per total milligram of peptide, which is the lowest cost per milligram of any supplier in this guide that publishes real batch-level certificates. Cheaper options exist, but none of them pair the price with documentation a buyer can actually check. Products are fulfilled from the USA and ship in a reusable magnetic case inside secure protective packaging.

Key highlights:

• Five batch certificates published directly on the product page, each with lot ID and report date
• Third-party testing laboratory named on-page: Freedom Diagnostics
• Test battery specified: LC-MS identity, HPLC-UV purity, LAL endotoxin per USP <85>, net content
• 99% purity by HPLC-MS, current batch at 99.72%
• Lowest price per milligram among vendors publishing verifiable batch COAs
• Full-length 43-amino-acid TB-500, CAS 77591-33-4

Every batch certificate is archived in the Protide Health COA library, and the BPC-157 and TB-500 Wolverine Blend product page lists current specifications and availability. All products are sold for research use only.

2. Oath Research

Best for: Buyers who already hold an Oath Research account.

Oath Research sells its blend as “WOLVERINE” BPC-157/TB-500 in 10mg (5/5) and 20mg (10/10) vials at $90 and $150, or $9.00 and $7.50 per total milligram. The company is based in Gilbert, Arizona, publishes batch certificates, and uses Freedom Diagnostics for analytical testing.

Access works differently here than at most suppliers. Account registration is required before the catalog can be browsed, so the full range cannot be reviewed without signing up first. Individual product pages remain publicly viewable. The brand is also mid-rebrand, with site banners reading “Oath Peptides Is Now Oath Research” while the footer still carries the former name.

Oath Research publishes net peptide content per vial, which is worth reading alongside the label. Anyone comparing per-milligram value across suppliers should work from assayed content rather than vial size.

Key highlights:

• Publishes batch certificates and per-vial net content figures
• Uses Freedom Diagnostics for analytical testing
• Account registration required before browsing the catalog

3. Eternal Peptides

Best for: Buyers who specifically want Janoshik laboratory reports.

Eternal Peptides offers a BPC-157 and TB500 blend in 5/5mg and 10/10mg vials at $69.99 and $129.99, or $7.00 and $6.50 per total milligram. It names Janoshik as its analytical laboratory and publishes an endotoxin report image alongside its purity certificates.

A rotating site banner reads “Card processing is back online,” alongside stackable discounts for select payment methods. The product description also gives conflicting figures, describing a “20mg total blend (5mg/5mg per vial)” when 5mg plus 5mg is 10mg. Confirm the vial contents and current payment options with the seller before ordering.

Key highlights:

• Janoshik named as the testing laboratory
• Endotoxin report published alongside purity certificates
• Product description gives conflicting total milligram figures

4. Evolve Peptides

Best for: Buyers who need a 15/15mg vial specifically.

Evolve Peptides offers 5/5, 10/10, and 15/15mg vials at $89.90, $159.90, and $199.90, with bulk tiers reaching 20% off. The 15/15 works out to $6.66 per total milligram, and the size is one most suppliers in this category do not stock.

Certificates are supplied on request rather than published on the product page, so verification happens after contacting the company rather than before ordering.

The specification itself also needs clarifying. The product page lists two mutually exclusive chemical identities for TB-500, giving CAS 77591-33-4 in one section and CAS 885340-08-9 in another. Those are the full-length peptide and the 7-amino-acid fragment respectively, and they are not the same compound. Confirm which version ships before ordering.

Key highlights:

• Offers a 15/15mg size that most suppliers do not stock
• Certificates supplied on request rather than published
• Product page lists two conflicting CAS numbers for TB-500

5. LiveWell Peptides

Best for: Buyers prioritizing manufacturer-direct sourcing.

LiveWell Peptides states that it manufactures rather than resells, citing a cGMP facility in Dallas, Texas alongside private-label and distributor programs. Its BPC-157 / TB-500 Blend Research Grade comes in 5/5mg and 10/10mg vials at $105 and $200, or $10.50 and $10.00 per total milligram, which places it near the top of the price range in this comparison. The product page cites three peer-reviewed publications with PMIDs.

Key highlights:

• States direct manufacturing from a cGMP facility in Dallas
• Cites peer-reviewed literature with PMIDs on the product page

6. PeakForce Labs

Best for: Price-driven buyers looking for a 20mg format.

PeakForce Labs sells a Wolverine 20mg vial at 10/10mg for $129, marked down from $179, which is $6.45 per total milligram. The company is based in Katy, Texas, the site shows live stock counts and runs a points program.

The purity figure needs confirming before ordering. The page carries three different numbers in three different places: a trust badge stating 99% or higher, a specification block stating 98% or higher by HPLC, and a meta description stating 98.7%. Nothing on the page indicates which figure applies to the vial being shipped, so ask the seller which spec the current lot was released against.

The certificate is a gallery image without a batch number, date, or named laboratory, which means it cannot be matched to a specific lot.

Key highlights:

• $6.45 per total milligram on a 10/10 vial
• Three different purity figures published on the same page
• USA tested

7. BioLongevity Labs

Best for: Buyers who specifically want the short TB-4 fragment rather than full-length TB-500.

BioLongevity Labs is USA-registered and GMP, holds membership in the American Peptide Association, and has its product content reviewed by a named MD. It publishes batch certificate images with traceable identifiers and a separate endotoxin certificate. Its BPC-157 TB-500 Blend is sold as a 10mg vial, meaning 5mg plus 5mg, at $119.97.

The specification differs from most other listings in this guide, and it is easy to miss. The specification table defines TB-500 as Ac-Leu-Lys-Lys-Thr-Glu-Thr-Gln, CAS 885340-08-9, molecular weight 889.0. That is the 7-amino-acid thymosin beta-4 fragment rather than the 43-amino-acid peptide specified by Protide Health, Oath Research, PeakForce Labs, and Eternal Peptides. Buyers who specifically want the fragment will find it clearly documented here; buyers expecting full-length TB-500 should note the difference before comparing prices.

Vial sizing follows the same pattern. Because the 10mg vial contains 5mg of each compound rather than 10mg of each, the cost works out to $12.00 per total milligram.

Key highlights:

• Publishes batch certificate images and a separate endotoxin certificate
• Specifies the 7-amino-acid TB-4 fragment, CAS 885340-08-9
• Vial sold as “10mg” contains 5mg of each compound, or $12.00 per total mg
• USA-registered and GMP

8. PureRx Peptides

Best for: Buyers working to a strict budget.

PureRx Peptides lists a Wolverine Stack at 10mg/10mg for $75.00, or $3.75 per total milligram, which is the lowest figure in this guide. The stated purity is above 99%.

Verification is limited relative to that claim. No testing laboratory is named on the page, and the certificate is an image without a batch number or report date, so it cannot be matched to a specific vial. No US manufacturing claim appears on the site.

Several pages also carry copy that has not been updated. The product description is duplicated three times and still contains internal marketing notes.

Key highlights:

• Lowest figure in this guide at $3.75 per total milligram
• Purity stated above 99%, no laboratory named
• Certificate carries no batch number or report date
• Policy pages reference an unrelated store; returns prohibited

How to Evaluate a Wolverine Peptide Vendor

Comparing suppliers in this category comes down to what can actually be checked rather than what is claimed. These criteria separate a verifiable product from a purity badge.

Look for Batch-Level Certificates, Not a Purity Badge

A generic image reading “99% Pure” is a graphic, not a document. A usable certificate names the testing laboratory, carries a batch or lot number, shows a report date, and can be matched against the number printed on the vial. Only three suppliers in this comparison publish certificates meeting that standard. Protide Health’s guide to reading a peptide certificate of analysis breaks down what each section of the document means.

Check Which Peptide the Label Actually Specifies

As covered above, the same product name can describe two chemically different compounds. Locate the CAS number before ordering. Full-length TB-500 is 77591-33-4. The 7-amino-acid fragment is 885340-08-9. If a page shows both, or shows neither, treat the specification as unconfirmed.

Compare Price Per Total Milligram, Not Price Per Vial

Labeling is inconsistent across the category. Some suppliers write “10mg” meaning 5mg of each compound. Others write “10/10mg” meaning 20mg total. Comparing sticker prices without normalizing produces a distorted picture, as the price table below shows.

Wolverine Peptide Blend Price Comparison

Normalized to total peptide content, prices in this category range from $3.75 to $12.00 per milligram, a spread of more than 3x for products described with nearly identical names.

PureRx Peptides is the cheapest option per milligram, but it publishes no batch-level certificate and names no testing laboratory. Among suppliers that publish verifiable batch certificates with lot numbers and report dates, Protide Health’s 30/30mg format at $5.08 per total milligram is the lowest cost in this comparison.

Frequently Asked Questions

Where to Buy Wolverine Peptide Blend: Key Takeaways

Deciding where to buy Wolverine peptide blend comes down to whether a supplier’s claims can be checked, and on that measure most of this market falls short. Protide Health ranks first in 2026 because it publishes batch-level certificates with lot numbers and report dates, names Freedom Diagnostics as its third-party testing laboratory, specifies full-length 43-amino-acid TB-500, and ships from the USA, while offering the lowest cost per milligram of any supplier here that documents its batches. Compare the current specifications and archived certificates on the BPC-157 and TB-500 Wolverine Blend product page before ordering.

---

Disclaimer: All products listed and sold through Protide Health are intended exclusively for Laboratory Research Use Only and are not approved for human consumption, ingestion, or clinical use. These products are not medicines, drugs, or dietary supplements and have not been approved by the U.S. Food and Drug Administration (FDA) to diagnose, treat, cure, or prevent any disease or medical condition. The rankings and reviews provided in this article represent the objective opinions of the Protide Health editorial team. This content is intended for educational and informational purposes only and does not constitute a legal or professional endorsement of any specific brand or product.